self-adhesive label material5

2022-11-03 17:39
2


Custom Label Blank Weather Marker Label Sticker5.jpg不干胶标签

Label printing

防伪标志丝印防伪标识关键即为涂层一部分部分进行防伪标识。

Silk screen anti-counterfeiting of anti-counterfeiting labels mainly refers to anti-counterfeiting of coating parts and parts.

建议涂层一部分尽量不要上复膜,因为复膜成本费相对性高而且不大好切磨,上光油是有效的办法。

It is recommended that the coating part should not be coated as much as possible,because the cost of laminating is high and it is not easy to cut and grind.Polish is the best way.

在规划不干胶标签的时候一定要无须整体上光油,一部分就就行了。

In the production of self-adhesive labels,try not to polish the whole,but part of it.

丝印丝印丝印网版筛网目数大小水准伤害这涂层薄厚,而环氧固化剂的浓淡水准决定了涂层美观大方。

The thickness of the coating is affected by the mesh size of the screen,while the thickness of the thinner affects the appearance of the coating.

不干胶标签的丝印防伪标识技术的发展渗漏防伪标识就运用水溶的钢网,其他的一般都是运用水溶性。

The silk screen anti-counterfeiting technology of self-adhesive labels uses water-based mesh plates for drip anti-counterfeiting,while others generally use oily ones.

所使用的丝印的钢网筛网目数一般为250-350目,基础知识来讲丝印钢网的筛网目数越大,预期效果就会越浓,而且涂层就会越硬。

The mesh size of the screen used is generally 250-350 mesh.Theoretically,the larger the mesh size of the screen,the thicker the effect and the thicker the coating.

在实际的应用当中发现,油墨印刷越浓丝印花纹就会越细致,倘若封闭液不够,可能起粉。

In actual use,it is found that the thicker the ink is,the more detailed the silk screen pattern will be.If the dilution is not enough,it may also peel.

丝印与设计排版和设计有关,设计排版室内空间设计越大丝印时位置越好调整;丝印而且也与温度有关,太潮湿或温度太高会严重影响丝印实际效果。一般温度高时要加慢干水或者特慢的783,温度低时要加快干水。

Screen printing is related to typesetting and design.The larger the typesetting space is,the better the position of screen printing can be adjusted;Screen printing is also related to the weather.Too much humidity or too high temperature will affect the effect of screen printing.Generally,slow dry water or super slow 783 should be added when the temperature is high,and dry water should be accelerated when the temperature is low.

丝印应注意客户的独立合同价标准和打码有一定的关系,倘若涂层上热印的涂层薄点也没关系;倘若涂层当中热印的则涂层要厚些;另外就是打码时字体效果尽量清晰汉字笔画却尽量要细点。

For silk screen printing,it should be noted that the customer's requirements for a single mark are related to the coding,and it does not matter if the coating on the coating is thin;If there is no printing on the coating,the coating shall be thicker;In addition,the font should be as clear as possible while the strokes should be as fine as possible.

丝印与标志置放次序相关:有序列号的和没序列号的应注意差别置放。

The silk screen is related to the order of label placement:the ones with serial number and those without serial number shall be placed separately.

丝印应注意原料的一大难题,不一样原材料是不一样油墨印刷好的经验做法。

Silk screen printing should pay attention to the problem of materials.Different materials have different inks and practices.

丝印应注意后整生产制造需不需要复膜,倘若丝印的那一部分很容易掉下去或抹除那就需要复膜。

Pay attention to whether the silk screen needs to be coated during the subsequent processing.If the part of the silk screen is easy to fall off or wipe off,it needs to be coated.

For screen printing,pay attention to whether to use color printing.Generally,the offset printing of color printing is better,but the screen printing that cannot be printed by offset printing can be printed.Therefore,it is often said that screen printing is omnipotent.

The silk screen printing technology of self-adhesive labels should understand the performance of ink,screen,position,adjustment,repair and washing.

The surface of silk screen shall not be pasted off or blistered;

It is worth reminding that it is generally recommended to finish the drip anti-counterfeiting at one time,because this screen version may not be enough if there is a slight pause in the middle.

The silk screen should be made according to the production order.If the temperature change is anti-counterfeiting,it should be noted whether the temperature change disappears or changes color;Pay attention to whether the temperature change effect is reversible or irreversible.

The standard for measuring the performance of silver powder on the screen surface is that it can be scratched off with fingernails,but can not be wiped off with fingertips.

name:
Message:
Verification code:
submit
Comment
XINDONG LIMITED
Russia market contact(Exclusive Dealer) WANG.YU Russia mobile: +79161835158 China mobile: +86-13514703730 (what's app & We chat same) Email: 13514703730@163.com
Tel:+86-757-82771149
+86-13360302234 ADD: D HALL SHIWAN SANITARY WARE CITY JIANGWAN ROAD CHANCHENG FOSHAN GUANGDONG CHINA
热线电话(whatsapp):
13360302234
联系邮箱:
ok_print@163.com
工作时间:
周一到周五09:00-18:00
在线客服微信二维码
WeChat
在线客服微信二维码
Whatsapp

Join in application

  • Your name

  • contact number

  • Contact email

  • Remark information